Cloud Mini Bath Bomb Mould | 3 STL + 3MF Digital 3D Print Files | Makes 3

DIGITAL DOWNLOAD ONLY – NO PHYSICAL MOULD WILL BE SENT

Create your own reusable Cloud Mini Bath Bomb Mould with this complete 3D-printable mould set.

The design is made as a three-part press mould with three mini cloud cavities, allowing you to make three bath bombs at the same time.

💾 WHAT YOU WILL RECEIVE

• 3 × STL files – one for each mould component
• 1 × 3MF project containing the complete three-part mould set

📏 APPROXIMATE MOULD SIZE

Each mould component has an overall footprint of approximately 104.6 mm × 103 mm.

• Part 1: approx. 104.6 × 102.9 × 12 mm
• Part 2: approx. 104.6 × 103.0 × 30 mm
• Part 3: approx. 104.6 × 103.0 × 26 mm

The finished set contains three bath bomb cavities and produces three mini cloud bath bombs per press.

🛁 HOW THE MOULD WORKS

1. Prepare your bath bomb mixture so it holds together when squeezed.
2. Place the centre mould section into position.
3. Loosely overfill the three cavities with your bath bomb mixture. Do not pack the mixture down too firmly before pressing.
4. Position the matching press section over the filled mould.
5. Press the mould pieces together firmly and evenly to compact all three bath bombs.
6. Carefully separate the mould pieces and gently release the bath bombs.
7. Leave your bath bombs to dry and harden fully before packaging.

Bath bomb recipes can behave differently depending on ingredients, humidity and moisture level, so a little testing may be needed to find the perfect amount of mixture and pressure for your recipe.

🖨️ SUPPLIED 3MF SETUP

• 0.20 mm layer height
• 0.4 mm nozzle
• 10% gyroid infill
• 3 wall loops
• Tree supports enabled for critical regions
• No brim

The supplied 3MF was saved using a PLA print profile. You may choose a different suitable filament and adjust your slicer settings for your own printer.

💗 COMMERCIAL USE INCLUDED

You may use the supplied digital files to create and sell finished physical 3D printed moulds.

You may not sell, share, gift, upload or redistribute the STL or 3MF files themselves, including modified digital versions.

PLEASE NOTE

• This listing is for digital files only.
• No physical mould or bath bombs are included.
• You will need access to a 3D printer and slicing software.
• Always check your finished print for damage or rough edges before use.
• Results will vary depending on your bath bomb recipe and pressing technique.

Designed by It’s Me Lisa G 💗